User`s guide

DL-WINDOWS™ V4.0 USER'S GUIDE 17
Connect the AL-PRE, lock and computer as shown in the figure
below:
1. Plug one end of the DB9 to DB9 Serial Cable into the rear of
the AL-PRE and plug the other end into the selected serial
COM port in the back of your computer.
2. Insert a 9 Volt battery into the back of the AL-PRE, or plug a
9V DC transformer plug into the side of the AL-PRE.
1. Open DL-Windows, select the Account and double-click the
lock you wish to update with Prox information. The Lock
Data screen appears.
2. Click the Global button (shown at right) and the
Global Users screen opens. Highlight the User by
clicking the "►" arrow to the left of the User Name
you wish to associate with the ProxCard
®
or ProxKey
®
key-
fob.
3. On the AL-PRE, press the red Push On button.
Note: If the AL-PRE is inactive (no ProxCards
®
are being
read) for 5 minutes, the AL-PRE will turn off automatically.
Press the Push On button on the top of the AL-PRE to
“wake up” the AL-PRE.
4. In the Global Users screen, click the Add Cards button.
The ProxCard Enrolling dialog opens. The AL-PRE is now
ready to accept Prox entries.
5. In the ProxCard Enrolling dialog (above), check Enable
AL-PRE.
Enroll ProxCards
®
with the AL-PRE
DB9 to DB9 Serial
Cable (supplied)
Enroll ProxCards
®
and ProxKey
®
keyfobs quickly into DL-Windows, then transfer this new ProxCard
®
data from the computer through the
AL-PRE to the lock. For PDL series locks only.
IBM COMPATABLE
LAPTOP OR DESKTOP PC
CONNECT DB9 CABLE
TO COMPUTER SERIAL
PORT (COM 1-4)
AL-PRE PROXCARD READER/
ENROLLER
NOTE: OBSERVE TAB DIRECTION
WHEN INSERTING CABLE INTO
AL-PRE AND LOCK
DOUBLE-ENDED MINI BANANA
PLUG CONNECTOR
PDL3000 LOCK
(continued)
Setting up the AL-PRE Proximity Enroller
AL-PRE -- Rear Panel
TO LOCK
TO COMPUTER
DOUBLE-ENDED MINI BANANA
PLUG CONNECTOR
DB9 to DB9 Serial Cable
(supplied)
To lock
NOTE:
OBSERVE
TAB DIREC-
TION WHEN
INSERTING
CABLE INTO
AL-PRE AND
LOCK
To computer
Optional: 9V DC Transformer:
Input: 120V AC, 60Hz, 8W
Output: 9V DC, 333mA min.
Use (1) 9 Volt Alkaline
Battery (Duracell MN1604 or
equivalent) or the 9V DC
Transformer described below.
Add ProxCards® and ProxKey® Keyfobs with the AL-PRE
Click the
"►" to
highlight
the User.