User manual

CONFIGURING SETTINGS
77
WD MY CLOUD USER MANUAL 
1. In the Language & Clock section, you can view or modify the following settings
Language From the drop-down list, select the language you’d like to
display on your WD My Cloud device web pages. The
default language is English.
Time Zone From the drop-down list, select the time zone where your
de
vice is located.
NTP Service Enable or disable the Network Time Protocol (NTP)
service, which automatically synchr
onizes your device to
update the time and date.
Primary Server Change the primary server used for your NTP service.
• To change the primary server used for your NTP
se
rvice, click Configure,
•Click Add Us
er NTP and enter the URL address of the
new primary server.
•Click Save.
Date & Time Displays the device date and time. This information is
syn
chronized to the NTP server by default.
Time Format From the drop-down list, select 12
(12-hour clock) or 24
(24-hour clock).
Date Format From the drop-down list, select the date format you’d like
to
use to display the date on your device.
:
2. Click Save for each change you make.
Cloud Access
Use the following steps to turn cloud access on or off for all users (i.e., control whether
computers and mobile devices can access the content on the WD My Cloud device)
.
Note: This action turns on cloud access for the entire device. To turn on access for
an individual user, see “Configuring Cloud Access for a User” on page 41.
1. Scroll down to the Cloud Access area of the General screen.
2. In the Cloud Service field, ensure that the
toggle button is set to ON. The Connection
Status changes to Connected (Port forwarding connection established).