User manual

DLM4000_Bed_Anleitung_v1.2_oce_eng.doc; 16.06.2009; M.Billmann; 9/13
6 Failure
In case of failure immediately power down the attached DC link and
disconnect the DLM4000 after safe discharge. In case of damages please
consult us directly.
7 Maintenance, Service, Accessories
7.1 Maintenance
This unit does not need maintenance. It may only be operated in dry, clean
areas.
Take care that the unit is kept in a non dusty condition. Dust may cause
dysfunction or reduced performance.
Abandonment
1. Discharge the connected DC link
2. Disable all energy sources and disconnect the unit from DC link.
Disassembly
For disassembly proceed as follows:
1. Dismount the unit into single components.
2. Sort these components for material plus disposal criteria and hand it to
an official waste management.
Disposal
Hint
Respect the specific disposal regulations of Your country.
7.2 Service
Never carry out repair on your own, please contact:
Ing.-Büro M.Billmann
Lerchensteige 10
D-91448 Emskirchen
phone: [phone]
fax: [phone]
email: [e-mail]