User manual

DLM4000_Bed_Anleitung_v1.2_oce_eng.doc; 16.06.2009; M.Billmann; 5/13
2 About this document
This document describes how to
- operate
- setup and check function of
- troubleshoot
the DC link Monitor for Power Electronics DLM4000
2.1 How to use this document
Please read this manual carefully, to operate the DLM4000 correctly.
On page 2 and 3 you will find the control elements and interfaces listed in
graphical illustration to get an easy link to the description in this manual.
This document targets to the following group of persons:
- Professionals in Power Electronics
- Electronics engineers in the field of IGBT stack development and testing
2.2 Used Symbols and abbreviations
Hint
Hints describe the advantages of certain adjustments and
setups and assist You to draw out maximum performance of
the unit.
Warning
Warnings: Read and follow these instructions carefully!
Warnings shall prevent people from danger and help to avoid
damage of the unit or the device under test.