User guide

4
DLM4000 User Guide
PN 161-09997-003A
Feb 2005
Connecting the DLM4000
The DLM4000 provides an RS232 port for the connection to other devices. Below is a diagram of the serial port
configuration. It is important to use the proper cable when connecting equipment to the DLM4000. It is recommended that
only Data-Linc Group cables be used to ensure optimal performance. Commercial serial cables will not always provide
proper configuration. Should you require a cable(s), contact Data-Linc Group at [phone] or
email [e-mail].
Pin Identification for the port
13 1
25
14
1niPdnuorGevitcetorP
2niPCLPehtmorfmedoMehtotniataD-ID
3niPCLPehtotnimedoMehtfotuoataD-OD
4niP tluafedybderongi,medoMotCLPmorfdnesottseuqeR-STR
5niP delbasidsilortnocwolf,CLPotmedoMmorfdnesotraelC-STC
6niPCLPotmedoMmorfydaertesataD-RSD
7niPdnuorGlangiS-DNG
8niPtceteDreirraC-DC
02niP tluafedybderongi,medoMotCLPmrofydaerlanimretataD-RTD