User's Guide

38 Part #880-0325-01 Rev. A
AlarmView™ System User’s Guide
1. To change bed number, tap the Down Arrow in the bed
number field. A current list of all bed numbers will be dis-
played. Continue to tap the Down Arrow until the bed
number you want is displayed.
2. Tap a new bed number from the list to assign it to this
transmitter.
3. To change pager numbers, tap the circles to the left of the
cap codes to select or deselect pager(s) to assign to this
transmitter.
You can select one pager, two pagers, or tap All Pagers to
assign all pagers in the system to this transmitter.
4. The Info Line will read “Now Press SEND Button” after you
have made your bed number and pager selections. Now you
need to program your new assignments into the transmitter.