User Manual

AlarmView™ System Administrator’s Manual
880-0326-01 REV. A Page 52
Pager
To replace pager batteries, refer to Appendix A: Basic Pager
Functions in AlarmView System User’s Guide.
Cleaning Procedures
When necessary, clean only the outer casing of the transmitter
with a soft cloth, damp with a non-abrasive, commercial cleaner
or 70% alcohol solution in water. Lightly wipe surfaces of
transmitter.
Use a clean cloth designed for lenses to clean the pager and
programmer screens. Use a damp cloth to dust their casings,
and wipe dry immediately.
Do not spray, pour, or spill liquids on any part of the AlarmView
System components. Do not submerge any of the components in
liquids.
If fluids are spilled in the equipment, take the equipment out of
service for at least 24 hours. Check operation of equipment before
returning to service.
Inspection and Testing
At least every two (2) years, inspect the transmitter, pagers,
cables, and programmer for mechanical and functional damage.
Inspect safety labels to ensure they are legible.
If any system components appear to be damaged, or subjected
to potential damage (such as being dropped or exposed to
liquids), qualified personnel should test the system using the
procedures in this manual.