User Manual

AlarmView™ System Administrator’s Manual
880-0326-01 REV. A Page 29
Section 4: Install Program
Using The Install Program
For basic operations of the AlarmView programmer – including On/Off,
adjusting contrast, backlight, setting date/time, and recharging or
replacing main and backup batteries – refer to Appendix B: Basic
Programmer Functions in the AlarmView System User’s Guide.
Recharge the main battery pack often. Ensure that the programmer
has at least charged main batteries or a charged backup battery
installed at all times, or programming and data in the programmer
will be lost.
Proprietary AlarmView System Manager (SysMgr) software will be
installed and running when you receive the programmer.
This section explains how to operate the AlarmView Install Program.
For all programming functions, use the stylus to tap the appropriate spot
on the screen to perform the desired action.
Use the stylus that came with the programmer or other stylus
designed specifically for use with a handheld computer. Use of
other pointed items such as pens and pencils may damage the
programmer screen.
Tap the Start button (lower left corner of screen) to access the
AlarmView Install Program to view and change system configuration and
parameters.
Tap the Keyboard button (lower middle of screen) to open and close
the keyboard on your screen. The keyboard will usually appear
automatically when it is needed for programming.