Manualshelf

User Manual

ManualsBrandsData Critical ManualsElectronicsModel AVTS1030, Rule Part 90.203(j)(7)
21222324252627282930
AlarmView™ System Administrator’s Manual
880-0326-01 REV. A Page 22
Connect to AC Power
1. Connect the power supply cord to the power input port on
the rear panel of the transmitter.
2. Plug the AC power cord into the other end of the power
supply. Only use the hospital-grade power cord provided by
Data Critical.
3. Plug the AC power cord into a properly grounded AC outlet.
Power Supply with Hospital-grade AC Power Cord