User's Guide

Section 5: AlarmView
TM
Maintenance, Service and Support
Part #880-0325-01 Rev. A 47
Section 5: Maintenance, Service, and
Support
Cleaning Procedures
When necessary, clean only the outer casing of the transmitter with a
soft cloth, damp with a nonabrasive, commercial cleaner or 70% alcohol
solution in water. Lightly wipe surfaces of the transmitter.
Use a clean cloth designed for lenses to clean the pager and program-
mer screens. Use a damp cloth to dust their casings, and wipe dry
immediately.
u Do not spray, pour, or spill liquids on any part of the AlarmView
System components. Do not submerge any of the components in
liquids. If fluids are spilled on the equipment, take the equipment
out of service for at least 24 hours. Have appropriate service
personnel check the operation of the equipment before returning
to service.
Inspection and Testing
At least every two years, inspect the transmitter, pagers, cables and
programmer for mechanical and functional damage. Inspect safety labels
to ensure they are legible.
If any system components appear to be damaged, or subjected to
potential damage (such as being dropped or exposed to liquids), quali-
fied personnel should test the system using the procedures in the
AlarmView™ System Administrator’s Manual.