User's Guide

Communications Not
Established
Turn on the transmitter, as described above. The transmitter should not
be attached to any patient monitoring equipment as this point. The LED
on the front of the transmitter will be ORANGE to indicate that the
transmitter is attempting to establish communications with the patient
monitoring equipment. After 10 seconds of no communications, a page
will be sent indicating that no communications have been established.
Bed: xxxx
Comm Fail
Retrying
<Insert photo and or screen shot here>
Every 10 minutes after that, another page will be sent indicating that
communications have not been established. This will continue for one
hour. At this point, a page will be sent indicating that the transmitter is
turning off.
Bed: xxxx
Comm Fail
Tx Shut down
<Insert photo and or screen shot here>
Low Battery Warnings
If the battery becomes too low for proper transmitter functioning, an
alarm will be sent indicating the low battery situation, and the transmitter
will be shut down.