Service Manual

AlarmView™ System User’s Guide
{insert part #} Page 46
When speaking to a Data Critical Corp. representative, it may be
necessary to refer to your programmer software version to troubleshoot
problems. To obtain this information:
1. Turn on programmer.
2. Tap About button (About button reads AlarmView Wireless Data
Notification System at the top of screen). The About screen will
display.
{Insert SysMgr screenshot with about button identified}
About Button
3. The programmer software version number is on the bottom line of
the screen (vers 0.42 beta in example shown below).
{Insert screenshot of about screen}
About Screen
4. Click OK to exit and return to SysMgr.
Repairing and Replacing Parts
If it is necessary to return an AlarmView System component to Data
Critical Corp. for repair, contact Technical Services for shipping
instructions.
Replacement parts are shown in the following table.
Replacement Parts
Item No. Description
1 AlarmView Transmitter
2 7” Transmitter Antenna
3a Transmitter serial cable, with 15-pin adapter for Nellcor
NPB-290, NPB-295, and N-395