Service Manual

AlarmView™ Service and Installation Manual
Page 56
Test Pages
Test pages can be used to verify proper communications with
the patient monitor. Turn on the transmitter, as described above,
and establish communications with the patient monitoring
equipment (the LED will be GREEN). Once communications is
established, press the button on the transmitter (but, do not hold
it down). A “Test Page” will be sent indicating the current patient
data (SPO2, and Pulse Rate). Note that alarms take precedence
over Test Pages, and will be sent first.
Test Page
Bed: xxxxx
PR: xxx
SPO2: xxx
<Insert photo and or screen shot here>
POST
TBD