User's Guide

Warnings
Patient Monitoring - The most reliable method of patient monitoring
combines close personal surveillance with correct operation of
monitoring equipment. Patient alarm conditions and notifications are
primary functions of the patient monitoring system. It is imperative that
the caregiver and/or monitoring floor technicians monitor patient alarm
conditions. The AlarmView System is not intended for use as the
primary source for the patient alarm notification.
Accidental Spills - In the event fluids are accidentally spilled in the
equipment, take the equipment out of service and check for damage.
Check operation after drying 24 hours later.
Antenna Placement - The transmitter unit with a transmitter antenna
may interfere with computer equipment with electronic switchboards
located close to the antenna. If the transmitter unit must be located
close to these types of equipment, a remote antenna should be used.
Change of Performance - If the system fails to page users reliably,
contact the hospital staff responsible for electromagnetic environment
and Data Critical Corp. immediately. (Data Critical Corp. 24 hour support
at 1-877-322-7828)
Electrical Shock - To reduce the risk of electrical shock, DO NOT
remove cover (or back). Refer servicing to qualified personnel.
!