User's Guide

At this point, if the displayed data is correct, no changes need be made,
and the user is done. Exit the Configuration Program by tapping the “X”
in the upper right corner of the screen.
If the data needs to be changed, the Patient Bed Number can be
selected by tapping on the bed number drop down list, and highlighting
the desired bed number.
A maximum of two pagers can be selected by clicking the radio button
next to the desired pager number.
To change/view alarm severity selection or reminder page intervals, tap
the Advanced Setup Button on the upper left of the screen. If no data
has been previously downloaded, the PDA will attempt to establish
communications with the transmitter. When the data is downloaded, the
following screen will appear.