User Manual

PATIENT SETTINGS
PatientNet Operator’s Manual, v1.04, 10001001-00X, Draft 81
All information contained herein is subject to the rights and restrictions on the title page.
PATIENT SETTINGS
Once a patient is admitted and demographic information is entered into the system,
you can tailor the system to the individual patient. This section shows you how to
make settings to accommodate patients’ specific monitoring needs.
Note: All settings described in this chapter are channel-specific; they apply only
to the patient channel selected when you make the settings.
To select the patient, click on or touch the desired patient’s waveform. A box around
the waveform indicates the selected patient.
Unless otherwise noted, all instructions begin on the Patient Setting screen (fig. 34),
and with the relevant patient’s waveform selected.
Note: All patient settings modified at the Interactive-PatientNet Viewer (IRVS) are also
modified at the Central Station.
Fig. 34. Patient Settings screen