User Manual

FULL DISCLOSURE
PatientNet Operator’s Manual, v1.04, 10001001-00X, Draft 147
All information contained herein is subject to the rights and restrictions on the title page.
FULL DISCLOSURE
The system stores all waveforms and digital data for 24 (or 72) hours with the Full
Disclosure feature. You can review and print all or a portion of this data from the Full
Disclosure screen (see fig. 69 on page 148), which lets you select the time period and
how you want the information displayed and printed.
Full Disclosure is available for ambulatory and bedside monitored patients but not for
ventilator patients.
Select the patient and press the 24 Hr (or 72 Hr) button on the View screen to display
the Full Disclosure screen.
Note: The 72 Hr button will be displayed if you have the 72 Hour Full Disclosure
option enabled.
Disclosure Mode
Disclosure mode determines when to start and stop collection of the disclosure data.
Press the Mode button on the Full Disclosure screen to display the Mode popup (fig.
68).
Fig. 68. Mode popup
Select one of the following:
Start 1-Pass begins one 24-hour (or 72-hour) period of complete patient data
recording. At the end of 24 (72) hours, the mode automatically switches to Stop.
Stop stops recording. Up to 24 (72) hours of previously recorded data is saved, but
no new data is saved.
Continuous collects waveform data continuously with no ending point. Oldest
data is overwritten.