User Manual

PATIENT SETTINGS
PatientNet Operator’s Manual, v1.04, 10001001-00X, Draft 93
All information contained herein is subject to the rights and restrictions on the title page.
WARNING: It is possible that you can abort patient a transfer operation. If you abort the
transfer, then the patient waveform will revert back to the source channel.
The destination channel will not be monitored, and alarms at the source
channel must be turned back on manually. System operators must diligently
monitor patients undergoing transfers to assure that if an abort does occur,
the transfer can be re-initiated.
Aborting Transfers in Progress
You can stop a transfer while it is in progress by pressing the Transfer button a second
time. A popup message will appear asking you if you wish to halt/abort the transfer
(fig. 40). Click Yes if you wish to stop the transfer, or No to continue with the transfer
as described above.
Fig. 40. Halting a Transfer Popup