User Manual

SPECIFICATIONS
PatientNet Operator’s Manual, v1.04, 10001001-00X, Draft 251
All information contained herein is subject to the rights and restrictions on the title page.
DT-7000 and DT-7001
The DT-7000 is an externally powered Class 1 device and is suitable for continuous
operation.
The DT-7001 is an externally and internally powered Class 1 device and is suitable for
continuous operation.
Both devices are intended for non-patient connection use.
Table 34 DT-7000/7001 Environmental Specifications
Table 35 DT-7000/7001 Device Specifications
DR-10000 Access Point
The DR-10000 is an externally powered device and is suitable for continuous
operation.
DR-10000 Environmental Specifications
Operating Storage
Temperature
+41° F to +104° F
+5° C to +40° C
-4° F to +158° F
-20° C to +70° C
Humidity
15% to 95%
non-condensing
10% to 95%
non-condensing
Pressure/Altitude
1060 hPa to 700 hPa
-1,252’ to 9,840’
1060 hPa to 500 hPa
-1,252’ to 18,280’
Component
Requirements
Environmental Protection Transceiver is IPX1, Power Supply is IPX0
Power Supply input 120V, 60Hz, 35 VA
Output 6VOC @ 1.6 A
Frequency Range Programmable 608 - 614 MHz
Modulation Digital Encoded FM (FSK)
Dimensions 3.0 in. x 1.25 in. x 7.0 in. (11.0 in. tall with antenna up)
Operating Storage
Temperature
+41° F to +104° F
+5° C to +40° C
-4° F to +122° F
-20° C to +50° C
Humidity
15% to 90%
non-condensing
up to 90%
non-condensing