User Manual

SPECIFICATIONS
PatientNet Operator’s Manual, v1.04, 10001001-00X, Draft 247
All information contained herein is subject to the rights and restrictions on the title page.
SPECIFICATIONS
Specifications are provided to help you determine the space, ventilation, air condition-
ing, and power requirements to ensure proper operation of your monitoring system.To
provide adequate cooling of the equipment, you must maintain at least two inches of
air space at the top, rear, and both sides of computers and display monitors.
Ensure that the PatientNet Central Station is kept free of fumes, dirt, and electrical
interference.
Specifications are approximate and may change with the actual unit shipped. Call your
service representative if precise specifications are required.
Note: Specifications are subject to change without notice
Central Station and PatientNet Viewers
Table 23 Motherboard Components
Table 24 Computer Chassis
Table 25 System Environment
Intel Pentium
®
III
Processor 500 MHz Pentium III with integrated 512
KB cache RAM
System Memory 32 MB, SDRAM-ECC, PC100-pin DIMM
with gold-plated contacts
System BIOS Intel BIOS
4R4CBOXA.86A.0015.PO9
PCI Chip Set Intel 440 BX
Expansion Slots (full length) 3 dedicated PCI slots
3 dedicated ISA slots
1 shared slot for either ISA or PCI
Intel Pentium III
Type ATX Mini-Tower form factor Chassis
Height 14.76 in. (37.5 cm)
Width 8.94 in. (22.7 cm)
Depth 17.00 in. (43.2 cm)
Weight 35 lb. (15.9 kg)
maximum
Intel Pentium III
Operating
Temperature
+10° C to +35° C
+50° F to +95° F
Storage
Temperature
-20° C to +60° C
-4° F to +140° F