User Manual

THE PATIENTNET SYSTEM
42 PatientNet Operator’s Manual, v1.04, 10001001-00X, Draft
All information contained herein is subject to the rights and restrictions on the title page.
Waveform Trace Color
Choose waveform colors for bedside monitored patients using the Bedside Waveform
Setup buttons and for ambulatory patients using the ECG button under Ambulatory
Waveform Setup.
Press these buttons to cycle through the color choices shown below.
Table 2. Waveform Trace colors
Channel Button (Central Station)
Press the Ch button to select which patient channel on the system will be changed.
Pressing the Ch button will cycle through all available channels and then return to All.
The Ch default is All.
Channel Button [PatientNet Viewers (IRVS and RVS)]
Press the Ch button to cycle through the currently selected channels on the monitor,
from the first viewed position (first top-left corner) to the last viewed position (last
eight, bottom-right corner).
Default Colors
To choose system default colors as shown in table 1 on page 41 and table 2 (above)
press the Default button.
Waveform Color Choices Default
Bedside Waveforms
ECG white, red, green, yellow, blue white
P1 white, red, green, yellow, blue green
P2 white, red, green, yellow, blue green
P3 white, red, green, yellow, blue green
P4 white, red, green, yellow, blue green
P5 white, red, green, yellow, blue green
P6 white, red, green, yellow, blue green
SpO
2
white, red, green, yellow, blue green
RESP white, red, green, yellow, blue green
CO
2
white, red, green, yellow, blue green
Ambulatory Waveforms
ECG white, red, green, yellow, blue white