User Manual

FULL DISCLOSURE
PatientNet Operator’s Manual, v1.04, 10001001-00X, Draft 157
All information contained herein is subject to the rights and restrictions on the title page.
All Patients Button
The All Patients button prints the summary 24 (72) hour quality report for all patients
on the Central Station.
Note: This button is not displayed on the PatientNet Viewers.
The All Patients button prints the following:
• the average duration leads were off, number of times the lead off alarm was
triggered, and total time the lead off alarm was active
• the average duration alarms were off, number of times alarms were set to off,
and total time alarms were off
• the average duration of the low battery alarm, number of times the low battery
alarm was triggered, and total time the low battery alarm was active
• the average duration of the no signal alarm, number of times the no signal
alarm was triggered, and total time the no signal alarm was active
Data Loss
You may see “DATA LOSS” displayed on the zoomed-in Full Disclosure window and
on corresponding printouts. When this occurs, the waveform may appear to be “cut
off.” The cause of this phenomenon is a very small gap in the data stream. All data and
alarms are processed properly during a “data loss.”