User Manual

WMTS OPENNET LAN PROGRAMMING AND DIAGNOSTICS
PatientNet Administrator’s Guide, v1.04, 10001003-004, Revision B 117
All information contained herein is subject to the rights and restrictions on the title page.
5. Clicking the VTXP Diag button will open the VTXP Diagnostics screen (fig.
71).
Fig. 71. VTXP Diagnostics Screen
The columns in the VTXP Diagnostics screen are described below.
Ch
channel number
RX
the number of good VTXP packets that have been received for each
channel
TX
the number of good VTXP packets that have been transmitted to each
channel
Buffer Last
displays the number of bytes that were contained in the last good
received VTXP packet for each channel
Buffer Avg
displays the running average for the received buffer for each channel
Errors CRC
displays the number of VTXP CRC errors detected for each channel
Errors FRM
displays the number of VTXP frame errors detected for each channel
SEQ
displays the number of VTXP sequence errors detected for each channel
O/R
displays the number of over run errors detected for each channel
U/R
displays the number of under run errors detected for each channel
Reset
the Reset button will return each statistical value to zero
Exit
the Exit button returns you to the OpenNet Diagnostics screen