Instruction manual

Publication date: Feb., 2012
Revision A1
6
can switch between Link/ACT mode and SPEED mode by
pressing MODE button. When the switch is on Link/ACT mode,
the LED of each port indicates the link or act status. The LED of
each port shows the link speed status of the port using
different colors when the switch is on SPEED mode.
Table 4: Mode Status LED
LED Condition Status
Link/ACT
Green
OFF
Lit Green shows all LED of each port are in
Link/ACT mode. Each LED of the port lit
Green when port link is good, and Blinks
when any traffic is present.
SPEED
Blue
Green
Yellow
OFF
Lit Green shows all LED of each port are in
SPEED mode. Each LED of the port lit Blue
when the link on 10Gbps.
Green when the link on 1000Mbps
Yellow when the link on 100Mbps
Off when the link on 10Mbps