Instruction manual

Publication date: Feb., 2012
Revision A1
5
PORT AND
SYSTEM STATUS
LEDS
The GS-2328KX Series switch includes a display panel for
system and port indications that simplify installation and
network troubleshooting. The LEDs, which are located on left
hand side of the front panel for easy viewing. Details are shown
below and described in the following tables.
Table 2: Port Status LEDs
LED Condition Status
TP (Link/ACT) Green/Blink
Lit Green when TP link good
Blinks when any traffic is present
TP SPEED Green/Yellow/Off
Lit Green when TP link on 1000Mbps
Yellow when TP link on 100Mbps
Off when TP link on 10Mbps
SFP (Link/ACT) Green/Blink
Lit Green when SFP link good
Blinks when any traffic is present
SFP SPEED Blue/Green
Lit Blue when SFP link on 10Gbps.
Green when SFP link on 1000Mbps
Table 3: System Status LED
SYSTEM LED Condition Status
System
Green
OFF
Lit when power is coming up
POWER SUPPLY
SOCKET
There are a power sockets on the rear panel of the switch. For
normal power supply, the GS-2328KX-Port Series Switch has
standard power socket for AC power cord.
Figure 3: Power Supply Socket
AC Power socket
MODE STATUS
LEDS
The GS-2328KX Series switch provides a mode switch
function. There are two mode for all LED of each port, which