User manual

APPENDIX 1: Modem S-REGISTER TABLE
APPENDIX 1: Modem S-REGISTER TABLE
No Default Unit Function Description
S0 1 times Auto-answer Ring Count
S1 0 times Current Ring Count (read only)
S2 43 decimal Escape Char
S3 13 decimal CR Char
S4 10 decimal LF Char
S5 8 decimal Backspace Char
S6 2 second Pause Before Blind Dial
S7 45 second Wait for Carrier Time
S8 2 second Pause for Comma
S9 6 100ms Carrier Validation Time
S10 15 1/.1s Lost Carrier Detect Time
( 1 sec unit for V34/V32bis/V32)
(0.1 sec unit for V22bis/V22)
S11 95 ms DTMF Tone Duration
S12 14 100 ms Guard Time (Escape Sequence Pause)
S13 19 binary Bit-Mapped Options (set/clear)
bit 4,3,2,1,0 - DTE Speed
0 - 300 bps
1 - 600 bps
2 - 1200 bps
3 - 1800 bps
4 - 2400 bps
5 - 3600 bps
7 - 7200 bps
8 - 9600 bps
9 - 12000 bps
10 - 14400 bps
11 - 16800 bps
12 - 19200 bps
13 - 21600 bps
14 - 2400 bps
15 - 26400 bps
16 - 28800 bps
17 - 32000 bps
18 - 38400 bps
19 - * 57600 bps
20 - 76800 bps
21 - 115200 bps
22 - 31200 bps
23 - 33600 bps
bit 7,6,5 - reserved
S14 00001010 binary Bit Mapped Options(set / clear)
bit 0 *0 - AT-C0 calling tone off
1 - AT-C1 calling tone on
bit 1 0 - ATE0 echo off
*1 - ATE1 echo on
bit 2 *0 - ATQ0 response on
1 - ATQ1 response off
bit 3 0 - ATV0 response code
*1 - ATV1 response word
bit 4 - reserved
bit 5 *0 - ATT Tone Dial
1 - ATP Pulse Dial
No Default Unit Function Description
6 - 4800 bps
59