User manual

CHAPTER 5 : INSTRUCTION SETS
Cmd Function Description
AT&Gn guard tone options
0 : disabled
1 : 550 Hz
2 : 1800 Hz
AT&Kn
or
AT\Qn
DTE flow control options
0 : no flow control
1 : XON/XOFF flow control
2 : CTS only flow control
3 : RTS/CTS flow control
AT&Ln line type selections
0 : dial line
1 : 2-wired leased line
2 : 4-wired leased line
AT&Mn
or AT&Qn
data format options
0 : async data mode
1 : sync data mode
AT&Pn dial pulse (MAKE/BREAK) ratio
0 : USA (39/61%)
1 : UK (33/67%)
AT&Rn RTS/CTS options
0 : RTS normal
1 : RTS forced on
AT&Sn DSR control
0 : DSR forced on
1 : DSR on after connect
AT&Tn selftest commands
0 : clear all test
1 : LAL test
3 : DL test
4 : RDL grant enable
5 : RDL grant disable
6 : RDL test
7 : RDL + TP test
8 : LAL + TP test
10 : TP on
AT&Vn view active config/user profiles/tel numbers
0 : view current active profile
n : view user profile n (n=1~9)
AT&Wn save to user profile n
n = 0 to 9
AT&Xn sync tx clock source options
0 : internal clock
1 : external clock
2 : slave (loopback) clock
49