User manual

CHAPTER 3 : FRONT PANEL AND MENU TREE
3.5.9 PROFILE MENU
Item Name Command Description
LOAD
ATZn
(n=0-9)
This machine provides 20 groups of load configuration
profile. Among them 10 groups configuration profile which
cover the most required applications for normal use. The
other 10 groups are set by the user which can be revised by
the user before filing for use.
User Defined :
User Profile#0..#9 AT&Zn
/User defined load profile #0..#9. Through this operation,
required settings can be made for the next operation when
the modem is power on.
Default profile : AT&Fn&W
Load factory profile #0..#9.
0: AS-DL-AT-AUTO AT&F0&W /Async, dial line, AT command, Auto reliable mode, V34
Adapt, this mode is most applicable to BBS networks.
1: AS-DL-AT-NONE AT&F1&W /Async, dial line, AT command, direct mode and V34 Adapt,
this is a typical operating mode for Hayes compatible
modem
2: SY-DL-V25-NONE AT&F2&W
/Sync, dial line, V.25bis command, V34 Adapt, this mode is
applicable to IBM AS-400 series sync dial networks.
3: AS-2L-ANS-V34 AT&F3&W
/Async, 2W leased line, answer, applicable to the most of the
async, non-compressed 2 wire leased line.
4: AS-2L-ORG-V34 AT&F4&W /Async, 2W leased line, originate, applicable to the most of
the Async, non-compressed 2 wire leased line.
5: SY-2L-ANS-V34 AT&F5&W /Sync, 2W leased, answer, applicable to the most of the Sync,
2 wire leased line.
6: SY-2L-ORG-V34 AT&F6&W /Sync, 2W leased line, originate, applicable to the most of the
Sync, 2 wire leased line.
7: SY-4L-ANS-V34 AT&F7&W /Sync, 4W leased, answer, applicable to the most of the Sync,
4 wire leased line.
8: SY-4L-ORG-V34 AT&F8&W /Sync, 4W leased line, originate, applicable to the most of the
Sync, 4 wire leased line.
9: ASY-2L-ANS-AUTO AT&F9&W /Async, 2W leased line, answer, applicable to the most of the
async, compressed, 2 wire leased line.
SAVE
AT&Wn
(n=0-9)
Store the revised configuration in the user-defined
configuration profile.
User Profile#0..#9 \/Store in the nth group in the user's configuration profile.
Usually, the 0th group is provided for the working area,
setting store in this area or load the factory default will
change the set parameters for next power-on operation. If
you want the nth group is to be used for the next power-
on working profile, operate the load user profile #n.
Front Lock
ATS29=n
Front panel lock control.
Unlock (bit4)
/No limitation for any front panel operation (default).
Lock
/Allow view the status and current setting of the modem,but
can not make any changes of setting.
Password edit
For changing password, use left key-L, right key-R, enter
key-E, exit key-X, Home key-V.
Input:_ _ _ _
/The password by the factory are "REEE" (right moving key,
ENTER, ENTER, ENTER).
Power up
AT&Yn
select the user profile to be used on power up.
User Profile#0..#9
Initial
AT&F10
Re-initialize the user profiles to the Factory
34