User manual

CHAPTER 3 : FRONT PANEL AND MENU TREE

MANU RETRAIN ATO2 Force Modem redo adapting.

RX BAUD = XXXX AT%S

Indication of the signaling rate of received signal. For

examples: RX Baud=3429 means the switching speed or

number of transitions is 3429, however, one baud can be made

to represent more than one bit per second. (This value is only

available when operating on V.34)

TX BAUD = XXXX AT%S

Indication of the signaling rate of transmitted signal. (This

value is only available when operating on V.34).

RX FREQ = XXXXHz AT%S

Indication of the carrier frequency of received signal. For

examples: RX Freq = 1959Hz means the unique frequency

used to to "carry" data is 1959 Hz. (This value is only available

when operating on V.34).

TX FREQ = XXXXHz AT%S

Indication of the carrier frequency of transmitted signal. (This

value is only available when operating on V.34).

TX SPEED =

XXXXbps

AT%S Indication of the DCE speed of transmission.

RX SPEED =

XXXXbps

AT%S Indication of the DCE speed of receiving.

TX POWEROFF =

XdB

AT%S Indication of a reduction of transmit power level. For

examples: TX PowerOff = 6dB means the transmit power level

is requested to reduce 6 dB by the remote modem. (This value

is only available when operating on V.34).

TR,MR,RS,CS,CD,T AT%S Indication of the RS-232 interface lead status.