User`s guide

Gyro Control Unit (GCU)
User’s Guide
21
MaxMetrix, Scottsdale, AZ
PN: GCU-2K1-UG:RevI.2 NGC
4.1.2 THE SCOPE
Figure 18 Oscilloscope Function, Gyro Setup
4.1.2.1 CHANNEL ENABLE
This check box allows the user to select the particular channel(s) to be displayed.
4.1.2.2 AUTO Y RANGING
This check box turns on and off the auto-range Y coordinate. When deselected the range is continually
adapted to accept the largest value read.
4.1.2.3 SAMPLE RATE
This drop down selection box allows the user to select a different sample rate for each sample record.
4.1.2.4 NUMBER OF SAMPLES
This check box allows the user to set the total number of samples to collect per record.