Unit installation

Start-Up

SCXF-SVX01K-EN 77

Operating & Programming Instructions

See IntelliPak™ Self-Contained Programming Guide, PKG-

SVP01B-EN, for available unit operating setpoints and

instructions. A copy ships with each unit. For units with

VFD option, see installer guide that ships with each VFD.

Startup Log

Complete this log at unit startup.

Unit: __________________________ Unit Location: _____________________________________

Unit Voltage: _____________________ _____________________ _____________________

ABC

Evaporator:

evaporator fan motor horsepower: _____________

evaporator fan

motor amps:

__________ __________ __________

ABC

evaporator fan rpm (actual): _____________________________

evaporator system static (from test and balance report or actual readings):

supply duct static: __________

return duct static: __________

evaporator air conditions with both compressors operating:

entering: leaving:

dry-bulb °F: __________ dry-bulb °F: __________

wet-bulb °F: __________ wet-bulb °F: __________

evaporator system cfm (test and balance sheet or actual tested): _______________

Compressor Amp Draw:

circuit A: __________ __________ __________ circuit B: __________ __________ __________

AB C A B C

circuit C: __________ __________ __________ circuit D: __________ __________ __________

AB C A B C

circuit E: __________ __________ __________ circuit F: __________ __________ __________

AB C A B C

suction pressure, psig: circuit A: __________ circuit B: __________ circuit C: __________ circuit D: __________