Specifications

GLYCOL COOLED: Performance data at STANDARD airﬂ ow

MODEL NUMBER GTGD/U007 GTGD/U011 GTGD/U014 GTGD/U018 GTGD/U028 GTGD/U035 GTGD/U046

FLUID COOLER SELECTIONS

Fluid cooler at 95° F ambient DAFC-06 DAFC-06 DAFC-06 DAFC-07 - - -

208-230/1/60 FLA/MCA/MOP 4.6/5.8/15 4.6/5.8/15 4.6/5.8/15 4.6/5.8/15 - - -

208-230/3/60 FLA/MCA/MOP 4.6/5.8/15 4.6/5.8/15 4.6/5.8/15 4.6/5.8/15 - - -

460/3/60 FLA/MCA/MOP 2.3/2.9/15 2.3/2.9/15 2.3/2.9/15 2.3/2.9/15 - - -

Fluid cooler at 100° F ambient DAFC-06 DAFC-06 DAFC-09 DAFC-15 - - -

208-230/1/60 FLA/MCA/MOP 4.6/5.8/15 4.6/5.8/15 4.6/5.8/15 9.2/10.4/15 - - -

208-230/3/60 FLA/MCA/MOP 4.6/5.8/15 4.6/5.8/15 4.6/5.8/15 9.2/10.4/15 - - -

460/3/60 FLA/MCA/MOP 2.3/2.9/15 2.3/2.9/15 2.3/2.9/15 4.6/5.2/15 - - -

CONDENSER WATER

Requirements at maximum design water pressure of 150 psi (high pressure optional).

65° F entering ﬂ uid temperature GPM 2.6 3.9 5.2 6.5 - - -

PD in PSI 0.9 1.9 0.9 1.2 - - -

75° F entering ﬂ uid temperature GPM 4.2 6.2 8.3 10.4 - - -

PD in PSI 1.6 5.8 1.5 2.5 - - -

85° F entering ﬂ uid temperature GPM 6.0 9.0 12.0 15.0 - - -

PD in PSI 3.2 7.5 3.5 5.0 - - -

With ﬂ uid cooler GPM 7.0 10.5 14.0 17.5 - - -

PD in PSI 4.0 8.2 4.4 6.5 - - -

PUMP SELECTION At design ﬂ ow

Horsepower 3/4 3/4 1 1 - - -

PUMP ELECTRICAL DATA

208-230/1/60 FLA 4.8 4.8 5.8 5.8 - - -

208-230/3/60 FLA 2.6 2.6 3.2 3.2 - - -

460/3/60 FLA 1.3 1.3 1.6 1.6 - - -

Notes: Fluid coolers are not available in 575 volts.

Fluid coolers are selected at sea level.

Pump selection is based on total available head pressure of 80 feet of water.

FLA - Full load amps

R-410A

gForce GT also available in R-407C. Data in a separate brochure.