User`s manual

22
2
1 Precautions
1.Transportation Security
No heavy stress, violent vibration or water splash are allowed during transportation, storage.
The unit should be transported in separated packing. In shipments of distributor and delivery
of maintenance, any damages caused by integral packing are not covered by warranty.
2. Installation
Avoid heavy stress and violent vibration during installation. Don’t touch the dome cover
directly by hand. When connecting the power source, please follow all electric safety
standards and only use the power supply designated for this device. Keep the video and
control signal in a decent distance from high voltage devices and cable. Don’t apply power to
the dome before finishing the installation.
3.Dismantlement
Please don’t dismantle the devices in the dome body. Only the professional personnel
authorized can operate the maintenance.
4. Internal Environment
Keep metal and inflammable material away from dome body to avoid fire, short circuit and
damage. Please prevent all liquids material from entering the dome. If occur this, please shut
down the power and pull out the plug. Then inform the technical personnel immediately.
5. Electrical Safety
The video image would be interfered when the dome is installed near television, radio
transmitter, voltage changer and audio amplifier.
6. Camera Protection
Avoid shooting very bright objects directly into the camera’s CCD (such as the sun or light
fittings).
7. Cleaning Method
Please don’t use abrasive and violent detergent to clean the dome. Please choose dry fabric
and neutral detergent. Use lens paper to clean the lens.