User`s manual

2323
23
A. IDLE ACTION
IDLE ACTION
TIME : 3 0 SEC
ACTION : NO ACTION
BACK
EXIT
――――――――――――――
A1
B1
DOME SETTINGS
<IDLE>
<ALARM>
<AUX>
<PRIVACY MASK>
<CLOCK>
<PASSWORD>
<OTHERS>
BACK
EXIT
――――――――――――――
<DOME TITLE>
A1：IDLE ACTION
Move the cursor to TIME, press IRIS ON to enter the edition mode of idle action starting time.
The time could be 30seconds, 2 minutes, 5 minutes or 10 minutes. Press IRIS ON to confirm.
B1： ACTION
Move the cursor to ACTION and press the key IRIS ON to edit the idle action type like preset,
scan, sequence or none.
B．ALARM
DOME SETTINGS
<IDLE>
<ALARM>
<AUX>
<PRIVACY MASK>
<CLOCK>
<PASSWORD>
<OTHERS>
BACK
EXIT
――――――――――――――
<DOME TITLE>
――――――――――――――
ALARM NO. : 1
INPUT STATE : CLOSE
ALARM MODE : OFF
TRIGGER ACTION : NONE
ALARM OUT : OFF/OUT1/OUT2/ALL
CANCEL TIME : 10SEC
START TIME : 0 0 : 0 0
STOP TIME : 0 0 : 0 0
ALARM SETTING
A1
B1
C1
D1
E1
F1
G1
H1
BACK
EXIT
A1. ALARM NO.
Move the cursor to ALARM NO., press IRIS ON to select the channel No. of alarm input. When
the channel No. has been changed, the system will update all the relative settings and
displayed data.
B1. INPUT STATE
Move the cursor to INPUT STATE, press IRIS ON to set the current state of alarm input as open
or close.