User`s manual

1111
11
6 Preset Setting
Speed dome camera supports 220 preset positions. The code numbers 1- 64 and 100-255
represent the 220 preset positions. You can activate some special functions by calling upon
code number 65-99.
No Command Command Packet Comments
Start Auto Scan Call upon 99 Default to start the first
group of auto scan
Start Sequence Call upon 98 Default to start the first
group of sequence
Start Pattern Tours Call upon 97 Default to start the first
group of Pattern Tours
1
Stop Auto mode/End
setting
Call upon 96
Set the right limit for
scan
Set 93
Set the left limit for
scan
Set 92
2
Set speed for scan Set 87 + Call upon pp
Default to set the first group;
PP means speed value: 1-30;
Start setting preset
position for sequence
Set 84 + Call upon
pp+…
Stop setting preset
position for sequence
Call upon 96
3
Set residence time for
sequence
Set 83 + Call upon qq
PP means the No. of preset
position(max 32); qq means
standing time: 1-60s, default
to set the first group.
Start pattern tours
setting
Set 86
4
Stop pattern tours
setting
Call upon 96
Default to set the first group.
Start the scan of group
N
Call upon 80 + call
upon pp + call upon 99
Set the right limit for
the scan of group N
Call upon 80 + call
upon pp + set 93
Set the left limit for the
scan of group N
Call upon 80 + call
upon pp + set 92
5
Set the speed for group
N
Call upon 80 + call
upon pp + set 87 + call
upon qq
PP means group No.:1-8,
qq means speed value:1-30