User manual

User Manual of Network Speed Dome

Figure 7-5 Recording Schedule Interface

2. Check the checkbox of Enable Record Schedule to enable scheduled recording.

3. Set the record parameters of the speed dome.

Figure 7-6 Record Parameters

 Pre-record: The time you set to start recording before the scheduled time or

the event. For example, if an alarm triggers recording at 10:00, and the

pre-record time is set as 5 seconds, the speed dome starts to record at

9:59:55.

The Pre-record time can be configured as No Pre-record, 5 s, 10 s, 15 s, 20 s,

25 s, 30 s or not limited.

Note: The pre-record time changes according to the video bitrate.

 Post-record: The time you set to stop recording after the scheduled time or