User`s manual

G1. BACK
Go back to upper menu
Note：
The settings of each time periods can not overlaid, and the time period can not
be allowed to exceed 00:00
If the use tries to control the dome during the TIMING ACTION, then the operation
will be stopped and if there is no operation after 25 seconds, then the dome will
resume the timing action.
G：AUTO TRACKING
MOTION
<SCAN>
<SEQUENCE>
<PATTERN>
<ZONES>
<TIMING ACTION>
<AUTO TRACKING>
――――――――――――――
<PRESET>
AUTO TRACKING
――――――――――――――
SENSITIVITY : 06
FRAME RATE: MID
BACK
EXIT
A1
B1
C1
ENABLE: OFF
A1.SENSITIVITY
Move the cursor to the option of SENSITIVITY and mover the joystick up and down to
adjust the sensitivities. Sensitivity of auto tracking funtion. Scale from1 to 15. The
smaller the value is, the higher the sensitivity is.
B1.FRAME RATE
Setting of the frame inspection rate (LOW/MID/HIGH).
C1. ENABLE
Enabel or disable the auto tracking function.