User`s manual

the edition mode of sequence No., move the joystick upward and downward to select
number. Then press IRIS ON to confirm.
B1. TITLE
Move the cursor to TITLE and press IRIS ON to enter the edition mode of sequence title.
C1.START
MOVE the cursor to START and press IRIS ON to start the current sequence.
D1.<SEQUENCE SET>
Press IRIS ON to enter into the sequence setting
SEQUENCE
SEQ NO. : 1
TITLE : SEQ 1
START
<SEQUENCE SET>
DELETE
――――――――――――――
BACK
EXIT
SEQUENCE
NO.
――――――――――――――
PR ESET
INTERVAL
0 1 0 0 2
0 3
0 2
0 0 1 0 3
0 3
- - -
- -
- -
- -
- - -
- - -
- - -
- -
0 4
0 5
0 6
EDIT 0 1 0 0 3 0 3 INS
BACK
>>
EXIT
Move the cursor to EDIT and press IRIS ON to enter edition mode. Move the joystick
rightward and leftward to select item.
a. When the < > is on the item NO., move joystick upward and downward to select the
NO.of the preset in a sequence. There are up to 32 presets in a single sequence.
b. When the < > is on the item PRESET, move the joystick upward and downward to
select the preset NO. you want to add in the sequence.
c.When the < > is on the item INS, move the joystick upward and downward to select
edition mode as “insert”, “ok” and “delete”.
d. Press IRIS OFF to quit the edition.