User`s manual

D1.Illumination
Move the cursor to “illumination”, and press iris on to enter setup mode. Move
the joystick upward or downward to set illumination value.
E1.Exposure mode
Move the cursor to“exposure mode”,and press iris on to setup mode. Move the
joystick upward and downward to select parameters, which can be set
as“Auot/Manual/Sutter priority/iris priority/Illumination priority”.
Note：For different cameras, the mode options might be different.
F1.Shutter Speed
Move the cursor to “Shutter speed”, and press iris on to enter setup mode. Move
joystick upward and downward to set shutter speed value.
G1.Wide Dynamic
Move the cursor to “wide dynamic”, and press iris on to enter setup mode. Move
joystick upward and downward to select parameters as“Low/Moderate/high”.
Note: For cameras without wide dynamic function, this option setup is not available．
H1. Initiation Setup
Move joystick to“initiation setup”,and press iris on to recover camera parameters as
default.
Operation Setup