User manual
- 75 -
border setting mode, appears on the screen "press IRIS open to confirm ...".Users can
operate on the dome, reaches the desired position and press IRIS open-storing the
current location for the area indicates that left border.
E1. Set right margin
Move the cursor to "set right", press the stop key to enter the area indicates that open
borders to set mode, appears on the screen "press IRIS open to confirm ...".Users can
operate on the dome, reaches the desired position and press stop key stores the current
location for the area indicates that open borders.
F1. Delete
Move the cursor to "delete", press the aperture on corresponds to a region, regional
groups.
F:Timing action
A1
B1
C1
D1
TIMING ACTION
------------------------------------------------------
NO Starttime Stoptime Motion
1 00:00 00：00 NONE
2 00:00 00：00 NONE
3 00:00 00：00 NONE
4 00:00 00：00 NONE
5 00:00 00：00 NONE
6 00:00 00：00 NONE
7 00:00 00：00 NONE
8 00:00 00：00 NONE
Tuesday : OFF Copy Back
MOTION
-------------------------------------------
<Preset>
<Scan>
<Cruise>
<Pattern>
<Zones>
<Timing Action>
Back
Exit
H1
G1
F1
E1
Timed run: refers to a user-specified time periods, perform pre-programmed functions,
such as preset, the cruise path path, mode, and scan.
Move the cursor to the desired setting, press IRIS open enter the time setting mode,
editing in the joystick left and right to select the desired start time, end time, linkage
function, respectively.Rocker bottom to edit the current content, press IRIS open to
confirm settings.
A1.
Timing function is divided into 7 days a week, can be set to 8 hours a day, joint action can
be set separately for each period: no action, preset, scan, 1-8, cent, mode path 1-4 the
cruise path.
B1. start time
Set current time, start time of a specified function is executed under.