User manual

- 74 -
E1. Delete
Move the cursor to "delete", by IRIS on path group deletes the corresponding mode
number mode path.
E:Zones
MOTION
-------------------------------------------
<Preset>
<Scan>
<Cruise>
<Pattern>
<Zones>
<Timing Action>
Back
Exit
ZONES
-------------------------------------------
—Zone is not set—
Zone Number ： 1
Title Set ：ZONE 1
<Left Limit>
<Right Limit>
Delete
Back
Exit
A1
B1
C1
D1
E1
F1
A1. region indicate state information.
B1. regional group number
Move the cursor to "regional groups" aperture setting mode, open access to regional
groups, sets, rocker bottom for regional groups. Dome area indicates the total supporting
8 group.
C1. Title settings
The title settings here display current title only; current title settings are in WEB.
See figure below
C1. Title settings
Move the cursor to "headers", as the Aperture open access to regional direct title settings
submenu, zone indicates that the title is set. Note: the current title set is on the WEB.
D1. Set the left border
Move the cursor to "set the left edge" by aperture space into regions indicates that left