User manual

- 73 -

D:Pattern

MOTION

-------------------------------------------

<Scan>

<Zones>

Back

Exit

PATTERN

-------------------------------------------

Pattern Number ：001

Title Set ：PATTERN 1

Start

<Set>

Delete

Back

Exit

A1. mode path group

Move the cursor to "mode path group number" in Aperture opening into the path group

setting mode, rocker mode path group, setting up or down.Ball machine total supporting 8

pattern path.

B1. Title settings

The title settings here display current title only; current title settings are in WEB.

See figure below

C1. startup path Move the cursor to "start mode path" by IRIS on path to initiate a pattern

group number mode path.

D1. set

Move the cursor to "set", in Aperture opening into the set mode, users can operate on the

machine and ball machine will record user actions, users press the aperture on the key

end mode path is set, at the same time if the progress bar when the expiration time or

record to (dome records of maximum support for 180 seconds), the mode and path

settings will automatically end.