User manual

- 70 -
B: Automatic scanning
MOTION
-------------------------------------------
<Preset>
<Scan>
<Cruise>
<Pattern>
<Zones>
<Timing Action>
Back
Exit
SCAN
-------------------------------------------
Scan Number ：1
Title Set ：SCAN1
Start
<Left Limit>
<Right Limit>
Scan Speed ：20
Back
Exit
A1
B1
C1
D1
E1
F1
A1. scan group
Move the cursor to "scan group number" setting mode press the IRIS on entering the
scan group number, rocker arm to scan up and down group
Settings. Supports 8 ball leads the Group scan path.
B1.Title settings
The title settings here display current title only; current title settings are in WEB.
See figure below
C1. Start scan
Move the cursor to "Start scan", press IRIS open to initiate a scan path, scan group.
D1. set left border
Move the cursor to "set the left edge" and click stop on-access scan set left border mode,
appears on the screen "press IRIS open to confirm ...".Users can operate on the dome,
reaches the desired position and press the aperture opened to store the current path to
the location to scan to the left edge.
E1. Set right margin
Move the cursor to "set right" right edge press the stop on-access scan settings mode,