User manual

- 69 -

A:Preset positions

MOTION

-------------------------------------------

<Scan>

<Zones>

Back

Exit

PRESET

-------------------------------------------

Preset Number ：001

Title Set ：PRESET01

Call

<Set>

Delete

Back

Exit

A1. preset number

Move the cursor to "preset", press the stop on entering setup mode, preset, rocker,

preset up and down

Settings. Ball machine supports a total of 220 preset positions, 1-64%.

B1. Title settings

The title settings here display current title only; current title settings are in WEB.

See figure below

C1. call

Move the cursor to "call", press the stop on call corresponds to a set of presets.

D1. Set the aperture opened enter preset position setting mode, appears on the screen

"press IRIS open to confirm ...".Users can operate on the dome, reaches the desired

position and press the aperture set to store the current position.

E1. deleted

Move the cursor to "delete", press the aperture on correspond to the preset preset

number.