User manual

- 56 -
A
B
E
C
D
F
G
MAIN MENU
-------------------------------------------
Language：English
<System Information>
<Display Settings>
<Dome Settings>
<Camera Settings>
<Motion>
<Help>
Exit
DOME SETTINGS
-------------------------------------------
Auto Flip ：ON
Auto Stop Time ：30Sec
Menu OFF Time ：5Min
Tilt Angle Set ：-5
Speed Level ：Auto
<Idle Action>
<Next Page>
Back
Exit
H
A：Auto Flip
Open auto flip function
B： Auto Stop Time
The dome will stop PTZ move after a certain period when the stop code is not received by
dome. The period could be 5/15/30/60 seconds.
C： Menu Off Time
The OSD menu will be automatically closed when there is not any operations for a certain
period. The period could be 1/2/5/10 minutes
D：Tilt Angle Set
Set the negative angle of PTZ from 0 degree to -15 degree, the maximum tilt degree can
be customized.
Interval is 1 degree. After the user set the starting angle, power and restore the factory
settings will be kept for the user to set the angle.
E：Speed Level
High speed, medium speed and low speed options are available for maximum PTZ
control speed.
F：Idle action
Move the cursor to the "standby setting", Press iris on to setup "Idle action"