User manual

- 38 -
User name / password: the default value is QQ / QQQQ.
[Server name]: The default value is NVSS-80, fill in the domain name registered on the
DNS server.
[IP1]: domain name server IP address.
Port: fill in the default value 6004.
[UPnP]: Select “UPnP enable”, it will support UPnP port mapping and router supports
UPnP function to establish the mapping between IP and port.
DDNS (5.35), check the "DDNS Enable" box.
How to use:
Login www.3322.org, register users. And add XXX.3322.org, where XXX is the name of
the user-defined, mapped server used to bind the need.
Enable the network video server dynamic domain name resolution, fill out the option as
below:
[Server domain]: fill in the domain name registration in www.3322.org XXX.3322.org.
[DNS domain] Select www.3322.org server.
[Port]: Server Web port.
Username / Password: to fill registered user name and password. in www.3322.org. After
all fill confirmed, click “Set”.
Fig.5.35
PPPoE (Figure 5.36)