User manual

- 11 -
Threading
Rotate 90 degree
Raising
Locking
Step 3: Cable connection (see specific external line diagram)
Step 4: Fix high speed dome on the wall
Put the cables (including power, video cable, RS 485 and ground line) through the
bracket. Then fix the speed dome base and the bracket with 4 screws and lock with ￠8
plain cushion and nut. Note: Do not let bracket suppress cable. Screw the nuts tight to
avoid high speed dome camera drop.
Fixed tube expanding screw
Note: For outdoor use, please pay attention on veneer cracks and cable hole
sealing to ensure waterproof. Above is the installation of cable, installer can also
lead the cable out of the outlet on the side of the bracket.
Step 5：Tear off the protection film
Peel off the protective film transparent ball cap. Note: to prevent foreign objects such as