Installation manual

5
SPECIFICATIONS
FIREPLACE DIMENSIONS
FIREPLACE
DIMENSIONS
DESCRIPTION Height Width Back Width Depth Opening
Width
Glass Frame
Height
Stand-off
Height
Back to vent
center
INCHES
32 35-7/8 27-7/8 15-1/4 31-3/8 24-3/8 5-1/2 7-1/2
MILLIMETERS
813 911 708 387 797 619 140 191
CLEARANCES
Top of unit face to framing 5-1/2” (140mm)
From unit left & right sides & back 1/4” (6mm)
To flooring 0” (0mm)
Unit top to ceiling 31” (787mm)
Unit side to adjacent sidewall 1-1/2” (38mm)
Unit front to combustibles 36” (914mm)
Top of unit to 3/4” (19mm) trim 10” (254mm)
Mantel 4” (102mm) deep from top of fireplace 16” (406mm)
WARNING
Top stand-off brackets must be attached to fireplace. Do not remove. Stand-off brackets are not load bearing.
Non-combustible zone: Stand-offs provide 5-1/2” (140mm) minimum clearance to header. Use only non-combustible
material in this area for entire width of fireplace. Do not use wood, sheetrock etc. in this zone. Other clearances apply.
All clearances must be maintained.
Figure 5a