Use and Care Manual

17
How to print your designs
WHILE PRINTING
Adjusting the line thickness using the pressure dial
The pressure dial can be used to adjust the amount of batter dispensed while
printing. The required pressure will vary based on the thickness of the batter being
used - the thicker the batter, the more pressure needed. To increase or decrease
the pressure, rotate the dial on the control panel. Higher numbers indicate higher
pressure within the Dispenser Bottle.
*TIP: Before printing designs, we recommend that you print a test le with straight
lines to help you adjust the pressure dial and griddle temperature to suit your
batter recipe.
Adjusting the printing speed.
The printing speed of the PancakeBot can be adjusted while the machine is in
operation by selecting the or arrow. Pressing the button each time will
increase the speed by 10% while pressing the button will decrease the speed
by 10%.
NOTE: Speed adjustment only works with PancakeBot 2.0 or the original
PancakeBot with a rmware update.