Use and Care Manual
16
How to print your designs
Standby Mode: The PancakeBot will go into Standby mode automatically after
being idle for more than 5 minutes (except if you have pressed the PAUSE button).
To turn back on, simply press the Power Button on the Control Panel.
WARNING: Do not overīll the Dispenser Bottle or tilt the Dispenser Bottle while it
is connected to the Air Hose and the PancakeBot is turned on. If you see pancake
batter entering the Air Hose, disconnect the Hose from the Gantry and shut
the PancakeBot off immediately. Thoroughly clean and dry the Air Hose before
reconnecting.